 |
 |
時間：2024-09-14 來源：合肥網(wǎng)hfw.cc 作者：hfw.cc 我要糾錯
The Structure of Information Networks
Homework 1
CS/INFO 6850 Fall 2024
Due 6pm, Wednesday, Sept. 18, 2024
The goal of this problem set is to provide practice implementing some basic network analysis techniques on a moderate-sized network dataset — specifically, a coauthorship network con-structed from a bibliography file of computer science papers maintained by Joel Seiferas at the University of Rochester. To make sure that the bibliography file is easy to obtain, a copy of it is has been posted on Canvas as the file “ps1data.txt”. As a first step, we will only be using papers written between the years 1985 and 2005 inclusive, so you should only keep lines in the file corresponding to papers written in this interval.
Building the coauthorship network. Here are some instructions on how to create the coau-thorship network from the raw bibliography. The short explanation is: each line represents a paper, and we want to build the undirected graph whose nodes are the people named in the bibliography, and whose edges join those pairs of people who’ve coauthored a paper in the bib-liography. This graph should only be constructed using papers written between the years 1985 and 2005 inclusive.
The more detailed instructions now follow. Each line in the bibliography describes a distinct paper, and has the following format:
year [number] conference/journal author & author & ... & author, title
Here, conference/journal is an acronym encoding the conference or journal where the paper appeared, year is the year of the paper, and number is the volume number of the journal or conference. We write number in brackets above because it is present in some lines and (when it is not known or not applicable) absent in others. Authors are given by last name only, and separated by the & symbol. The list of authors ends with a comma, and the the remainder of the line is the title. Thus, a sample line from the file is
1994 11 ALGRTHMICA Khuller & Naor, Flow in Planar Graphs with Vertex Capacities
encoding the paper “Flow in Planar Graphs with Vertex Capacities” by Khuller and Naor in Volume 11 of the journal Algorithmica. Finally (as with any list of records of this length), it is possible that a few of the lines in the file are misformatted.
You should start by only keeping lines for which the year is in the interval [1985, 2005] (including the two endpoints 1985 and 2005). From this set of lines, you should construct a coauthorship network as follows.
• There should be one node for each person. (Note that even if a person is an author on 50 of the papers listed in the bibliography file, there should still just be one node corresponding to him or her, not 50.)
• There should be an undirected edge between nodes A and B if and only if they are coauthors on a paper in the bibliography. (If they are coauthors on multiple papers, there should still just be a single edge joining them.)
For example, if the file consisted of just the three lines
1992 27 BAMS Alon & Kleitman, Piercing Convex Sets
1994 11 ALGRTHMICA Khuller & Naor, Flow in Planar Graphs with Vertex Capacities
1996 45 IEEETC Azar & Naor & Rom, Routing Strategies for Fast Networks
then the graph should have node set
{Alon, Azar, Khuller, Kleitman, N aor, Rom}
and edge set
{(Alon, Kleitman),(Azar, N aor),(Azar, Rom),(N aor, Rom),(Khuller, N aor)}.
Caveats. Before we move on to the problems themselves, here are three points worth mention-ing about the network we’re studying here.
(i) As we’ll see at various points in the course, coauthorship networks are a popular kind of “model system” for large-scale network analysis. This is not so much because there’s universal fascination with the coauthoring habits of scientists (though it’s an interesting topic that some people study as their research area), but because coauthorship networks are a kind of social network, encoding a particular type of collaboration among people, for which extremely rich and detailed data is available. As a result, it is a chance to try out network analysis techniques at very high resolution, in a setting that possesses many of the properties exhibited by much “messier” and harder-to-measure social networks as well.
(ii) Any time one tries to build a network from a file containing a list of names, there’s the concern that different people can have the same name, and hence these different people are being “merged” into a single node. This is definitely something to worry about when one tries to draw inferences about social structure from the resulting network. However, in our case, we are using this dataset simply to build an interesting graph on which to practice various analysis techniques, so for our limited purposes there’s no problem: if two authors have the same last name, then for us they are the same person.
(ii') In fact, because of the issue in (2), there are papers where someone appears to coauthor with themselves. We will omit from the network those edges that link some node to itself.
(iii) Point (ii) is a particular instance of a broader principle, that in building a network from everyday data such as this list of papers, some of the entries will be misformatted or contain idiosyncracies that conflict with the general assumptions we’re making about how the data is structured. For these unusual cases, it’s fine to make up a consistent set of rules for how you’re handling situations that don’t follow the expected structure, and to document the choices you made in doing this. The goal is to make choices that don’t have a significant effect on the result, where possible.
What to hand in
You should upload the following files to Canvas; please read this section carefully, since the format is important. In particular, for the first file, there is a specific line format we need, since we will be using scripts as part of the grading.
The files to hand in:
(1) An ascii .txt file named “hw1solution.txt”. This should have results for the questions below, with each line on which you are reporting part of the answer beginning with a “@”. The form. for these lines will be described in the questions below. The first line of this file hw1solution.txt should be just your NetID, as a single string.
(2) Four files named “plot1”, “plot2”, “plot3”, and “plot4”, containing the plots associated with Questions 1, 2, 3, and 4 respectively. These can be in any standard image format (e.g. plot1.png, or plot1.jpg, and so forth.).
(3) The source code you used to compute the answers. By default, we won’t be grading the quality of the code itself, but it will be useful to have it in case we run into any confusion. It is fine to use packages or software specifically designed for handling graphs, in which case you should just include what you wrote. If you answer the questions by some means where the notion of “source code” doesn’t exactly apply, such as an interactive session with a software package, then submit whatever analogue of source code we’d need to see how you answered the questions — for example, a script. you wrote as part of some larger existing package, or a transcript. of an interactive session in which you did it. (This file should be named “code” and can be in any format; if you need to bundle together multiple files, for example, it can be a zipped or gzipped folder or tar file.)
(4) A brief description of how to apply your code (or code analogue, or transcript) to the data, together with any decisions you made about how to handle the data that would be useful for us to know about. (This file should be named “explanation” and can be in any format. It’s this file that can address any decisions on data-handling that you had to make in accordance with general caveat (iii) above.)
Again, for most of the solutions, we’ll simply be evaluating (1) and (2), and only consulting (3) or (4) as background if necessary.
The Problems
(1) Recall that the degree of a node is the number of edges it’s incident to. We start by considering how the degrees of the nodes are distributed.
Thus, for a number j, let nj denote the number of nodes with degree exactly j. Let d ∗ be the maximum degree of any node in the network. (This is the maximum total number of co-authors that any one author has — the maximum j for which nj > 0.)
(a) For each j from 0 to d ∗ , output the number nj . Each of these should correspond to a line in the file hw1solution.txt with the following four fields
@ 1 j nj
(The second field here simply denotes that you’re answering the first question.) So for example, in the file above consisting only of the three lines
1992 27 BAMS Alon & Kleitman, Piercing Convex Sets
1994 11 ALGRTHMICA Khuller & Naor, Flow in Planar Graphs with Vertex Capacities
1996 45 IEEETC Azar & Naor & Rom, Routing Strategies for Fast Networks
the correct output would be
@ 1 0 0
@ 1 1 3
@ 1 2 2
@ 1 3 1
(Recall that before any of these lines, the first line of your file hw1solution.txt should be your NetID.)
(b) Produce a scatterplot in the plane of the ordered pairs (log j, log nj ) for those j such that both j > 0 and nj > 0. Hand this in as the file plot1. Later in the course, we’ll see some proposed explanations for why such scatterplots can often be approximated fairly well by a straight line.
(2) Now we consider the sizes of the connected components in the network.
(a) Let n* be the number of nodes in the largest connected component, and let n be the number of nodes in graph overall. Report these two quantities and their ratio, as a line in the file hw1solution.txt of the form.
@ 2 n* n n*/n
For example, on our sample graph above, you would report
@ 2 4 6 .667
Looking at the ratio of these two quantities is a good way to assess whether we should think of the network as having a “giant” component, or whether it consists entirely of small components.
(b) Let kj denote the number of connected components of size j, and let c* denote the size of the second-largest component. For each j from 1 to c*, output the number kj . Each of these should correspond to a line in the file hw1solution.txt with the following four fields
@ 2 j kj
For example, on our sample graph above, you would report
@ 2 1 0
@ 2 2 1
(c) Produce a scatterplot in the plane of the ordered pairs (log j, log kj ) for those j such that both 1 ≤ j ≤ c* and also kj > 0. Hand this in as the file plot2. The extent to which logarithmic plots of component sizes should look like straight lines is less heavily studied, but there is evidence for this as well.
(3) We next consider node-to-node distances in the largest component.
(a) We start by fixing the author name Gries (i.e. David Gries, an eminent faculty member of Cornell CS, who joined in its early years) as our “root node.” For each j, let rj denote the number of nodes at distance exactly j from Gries. (So r0 = 1, and r1 is equal to the degree of Gries.) Let s* denote the largest j for which rj > 0 — this is the farthest anyone in the bibliography is from Gries, yet still connected to him by a path.
For each j from 1 to s*, output the number rj . Each of these should correspond to a line in the file hw1solution.txt with the following four fields
@ 3 j rj
For example, on our sample graph above, if the starting node were Khuller (rather than Gries), you would report
@ 3 1 1
@ 3 2 2
(b) Produce a histogram that plots rj as a function of j, for j from 1 to s*. Hand this in as the file plot3.
(4) Finally, we continue the analysis from the previous question by considering the structure of breadth-first search trees. In a graph G, a breadth-first search tree rooted at a node r is simply a tree T that we build as follows. We first make node r the root of T. Then, for j = 1, 2, 3, ... in increasing order, we include in T all the nodes whose distance from r in G is equal to j. When we get to a value of j (meaning that we’ve already included all nodes at distance up to j − 1 in T), we consider each node v whose distance from r is equal to j. For each such v, we include it in T by making it the child of some node u at distance j −1 from r, where u and v are neighbors in G. Note that since there might be multiple choices of u for a given v, this means that there may be multiple breadth-first search trees rooted at r.
A breadth-first search tree thus satisfies the following properties.
(i) The root of T is r, and T contains precisely the nodes in r’s connected component.
(ii) Each edge of T is also in G.
(iii) For each node v in T, if the shortest-path distance from r to v in G is equal to j, then v is at depth j in T.
(a) Construct a breadth-first search tree T rooted at the node corresponding to Gries. Above, we noted why there can be many different breadth-first search trees with a given root: each time a node v at distance j from the root has multiple neighbors at distance j − 1, each of these neighbors is eligible to be the parent of v.
One way to quantify this variability is to count the number of options that nodes have for their parents. For a node v at distance j from the root, let’s say that u is a potential parent associated with v if u is at distance j − 1 from the root, and u is a neighbor of v in the graph G. Note that the parent of v in the breadth-first search is one of the potential parents associated with v.
For each j, let pj denote the average number of potential parents associated with nodes at distance j from the root node (in this case, Gries). That is, each node v at distance j from the root has a number of potential parents associated with it; we take the average of these numbers over all nodes v at distance j from the root.
Recall from the previous question that s* denotes the largest j for which there is some node at distance j from Gries.
For each j from 1 to s*, output the number pj . Each of these should correspond to a line in the file hw1solution.txt with the following four fields
@ 4 j pj
To construct an example with respect to potential parents, suppose we add two more papers to our sample input from earlier (to go along with the three we already have), so that the full input is now:
1992 27 BAMS Alon & Kleitman, Piercing Convex Sets
1994 11 ALGRTHMICA Khuller & Naor, Flow in Planar Graphs with Vertex Capacities
1996 45 IEEETC Azar & Naor & Rom, Routing Strategies for Fast Networks
1987 16 SICOMP Azar & Vishkin, Tight Comparison Bounds on the Complexity of
Parallel Sorting
1992 24 STOC Khuller & Vishkin, Biconnectivity Approximations and Graph Carvings
Now, if we construct a breadth-first search tree with Khuller as the root node, using the co-authorship graph built from these five papers (the two above and the three original ones), then the resulting tree will have Naor and Vishkin at depth 1, and Azar and Rom at depth 2. Naor, Vishkin, and Rom each have one potential parent in any breadth-first search tree rooted at Khuller, but Azar has two potential parents: Naor and Vishkin.
Thus, on this example input with five papers, the output would be
@ 4 1 1
@ 4 2 1.5
(b) Produce a histogram that plots pj as a function of j, for j from 1 to s*. Hand this in as the file plot4.
請加QQ：99515681 郵箱：99515681@qq.com WX：codinghelp
|
|
|
|
|
|
|
|
 |
關于我們 | 打賞支持 | 廣告服務 | 聯(lián)系我們 | 網(wǎng)站地圖 | 免責聲明 | 幫助中心 | 友情鏈接 |
